The name says it all when it comes to the Duncan Vineyard Seeder.
At only 1.8m wide, this little double disc gem is designed specifically for planting between rows in vineyards and orchards, and the linkage hitch makes it easy to get in and out of the rows at the headlands.
It's fitted with side guards to protect the gearbox and flap handles from the vines, so you can be assured the seeder settings don't get knocked, and it will operate correctly all day long.
The double disc system can be used with or without press wheels, and will sow into the rough and rocky conditions that vineyards are known for, to establish a cover crop in one pass.
The powder coated Vineyard Seeder looks good, it’s tough and it will be a valuable asset to your horticulture or viticulture operation for many years.
Small to large
Up to 100Ha
Key Features
- Large diameter discs to cut through trash
- Peg tooth roller units for sowing a variety of seeds and fertilisers
- Rear foot board
- Weather skirts to protect the outlet units in damp conditions
- Weigh kit to weigh seed and fertiliser
- Twin boxes
- Simple calibration system
- Agitator shaft prevents seed compaction and vees in the bottom of boxes to improve seed flow
- Press wheels are optional
Technology
Gravity seed distribution
Our reliable metering system has been utilised on Duncan Drills for years. It is easy to calibrate and use, requires no tractor hydraulics to run it and it is incredibly accurate due to the seeds being metered from individual outlets for each run, with sowing rates of less than 1kg/hectare achievable.
Seed and fertiliser is stored in boxes above the drilling discs and drops into the metering peg roller system for each run, with paired large and fine seed wheels, and flow control flaps to handle different seed sizes and sowing rates.
The metered seed and fertiliser then drops down flexible hoses to be planted.
Each run outlet is metered individually providing a high degree of accuracy. Shutter slides at the top of each metering device are used to control the seed flow entering the metering unit and can also be used to shut off a seed row if it is not required. All the box shafts and drive shafts are made from stainless steel for corrosion resistance and longevity.
The calibration tray collects the seed when calibrating and conveniently is used to cover the metering units to stop any foreign matter entering the metering unit in operation.
A stainless steel agitator shaft runs in the base of each box to eliminate compaction and bridging, and improves the flow of fertiliser and seed into the metering units.
Adjustable flaps control the outlet flow of seed and fertiliser from the metering unit.
Our system of dual large and fine metering wheels allow for a wide range of seed types and fertilisers to be used. Disconnecting the large wheel with the supplied tool lets you sow small seeds at very low rates under 1kg /hectare.
Engage the large wheel for larger cereal or grass seeds and fertilisers at high rates, still with a high degree of accuracy.
Calibration App
Use the Duncan Seed Drill app on your phone for easy and accurate job configuration and calibration of any new or existing Duncan Renovator or Duncan Enviro drill, and take your drilling operations to the next level of productivity.
The Duncan seed drill app contains step-by-step user guides for making calibration and mechanical adjustments to your drill. Great for any new operator or if you're just a bit rusty yourself!
Calibrate multiple machines with the app, and get every operator set up with it too so they can do calibrations from their own phone.
Calibrating a ground drive drill with seed or fertiliser will display the required mechanical settings.
Connect wirelessly to a Duncan E-Drive drill to set up the sowing rates and run calibrations while you are right beside the drill.
Vineyard & Orchard Seeder Disc Technology
310mm diameter discs are easier to force into hard ground commonly found in vineyards and orchards
Two plain discs work side by side to open up a slot and place the seed evenly
A press wheel closes the slot to ensure a good seed soil contact
The press wheel helps to trap moisture by closing off the slot
The dragbar units are spring loaded to allow individual units to roll up over stones
The discs are excellent for cutting up prunings that may be lying across the ground
Vineyard Seeder Specifications
10 Row | |
---|---|
Sowing width (mm) | 1800 |
Overall width (mm) | 1835 |
Overall length (mm) | 1610 |
Overall height (mm) | 1520 |
Tare weight without press wheels (kg) | 823 |
Tare weight with press wheels (kg) | 873 |
Row spacing (mm) | 180 |
Box capacity (l per box) | 209 |
Recommended min tractor HP | 50 |